The Weston offers an understated wood-grain style elegantly accented with a satin nickel finish. When your bathroom mirror makeover calls for classic color and style, the Weston is the perfect choice.
If your mirror has a channel, or a thin medal strip running along the bottom, simply measure from the top of the mirror to the bottom of the channel. This channel will lie flat behind the frame once it is installed.*If you are unsure if your metal channel will work, please call or email us for
assistance.
No worries! Our Add A Frame® is completely flat on the back and can go right to the edge of your mirror. No extra room on the sides is needed! Be sure to measure the width and height at a few different locations to make sure your mirror is in-square. Some mirrors are hand-cut by installers and may not be a perfect square. Is one side longer than the other by just a fraction of an inch? Choose the larger measurement so no mirror shows on the outside of the frame.
If the light fixture is above the mirror, just measure the distance from the fixture to the mirror. If the light fixture is built into the mirror, measure from the inside edge of the mirror to the fixture and verify the width of the frame will fit in that space. If the light fixture hangs directly over the mirror, measure the distance between the light fixture and the face of the mirror. Be sure to choose a frame style that is thin enough to lie between them. Not sure the frame will fit? Buy a sample for $1 and test it yourself!
The Add A Frame® is designed for mirrors like yours! Simply select “0” from the drop down in the Bottom category. This tells us that you have no room for overhang. The frame will go right to the edge of the mirror and conveniently sit on the backsplash. Easy for installation, too!
If your mirror has a channel, or a thin medal strip running along the bottom, simply measure from the top of the mirror to the bottom of the channel. This channel will lie flat behind the frame once it is installed.*If you are unsure if your metal channel will work, please call or email us for
assistance.
No worries! Our Add A Frame® is completely flat on the back and can go right to the edge of your mirror. No extra room on the sides is needed! Be sure to measure the width and height at a few different locations to make sure your mirror is in-square. Some mirrors are hand-cut by installers and may not be a perfect square. Is one side longer than the other by just a fraction of an inch? Choose the larger measurement so no mirror shows on the outside of the frame.
If the light fixture is above the mirror, just measure the distance from the fixture to the mirror. If the light fixture is built into the mirror, measure from the inside edge of the mirror to the fixture and verify the width of the frame will fit in that space. If the light fixture hangs directly over the mirror, measure the distance between the light fixture and the face of the mirror. Be sure to choose a frame style that is thin enough to lie between them. Not sure the frame will fit? Buy a sample for $1 and test it yourself!
The Add A Frame® is designed for mirrors like yours! Simply select “0” from the drop down in the Bottom category. This tells us that you have no room for overhang. The frame will go right to the edge of the mirror and conveniently sit on the backsplash. Easy for installation, too!
Step 1: Enter Mirror Height and Width
Begin by measuring the height and width of your mirror. Enter the number, in inches, using the form below. Be sure to select the correct fraction to ensure a perfect fit!
Enter Width
Enter Height
* Please measure to the bottom of the frame's metal strip (if applicable)
Have questions? Read our FAQ for more helpful information
Learn more on measuring for your order on the Installation page. If you have a question about placing your order, feel free to give us a call at 1-800-331-6414.
1-800-331-6414.
For mirrors that have the space, we like to add a 3/8" overhang to finish off the look and conceal the edge of the mirror. To see if we can include that overhang, please let us know the distance from each edge of your mirror to the nearest obstruction.
Frequently Asked Questions
Click the examples below for details on how to measure.
Top
Bottom
Left
Right
Learn more on measuring for your order on the Installation page. If you have a question about placing your order, feel free to give us a call at 1-800-331-6414.
In order to ensure your new frame adheres properly to your mirror, we include replacement mirror clips with every order free of charge. These new clips replace any existing, bulky plastic clips and lie flat against your mirror. Please enter the number of replacement clips required along with some additional information on your mirror below.
How many replacement clips would you like shipped with your frame?
Is your mirror beveled?
Please select bevel width (in.)
If your mirror is beveled, please measure from the edge of the mirror to the interior of the bevel. Doing so will ensure that our frame adheres to the flat part of your mirror.Please note that some of our narrower frame styles may not be compatible with larger bevels. If this is the case someone from Frame My Mirror will promptly reach out to discuss your options.
Please review your order details below prior to adding your frame to cart.
Order Summary
Product Name:
Mirror Dimensions:
" wide x " high
Distance From Obstructions:
Top:
"
Bottom:
"
Left:
"
Right:
"
Clips or Fasteners:
No. of mirror clips:
Is your mirror beveled?:
Beveled width:
Based on the information you have provided, your frame will:
Have an outside dimension of " W x " H due to the distance from obstructions. (A 3/8" overhang is added only to each side with the available clearance.)
Ship with new metal clips to replace your plastic clips
If you have a question about your order, feel free to give us a call at 1-800-331-6414.
Handling Fee:
$99
Price:
Learn more on measuring for your order on the Installation page. If you have a question about placing your order, feel free to give us a call at 1-800-331-6414.
Classic meets contemporary with the Navarro, whose tiered style adds definition and depth to your bathroom mirror. A gently-weathered texture enhances the frame’s Charcoal finish.
Add to that modern touch you’re looking for in your space. At 3″, the Upton is already a statement piece for your mirror without being too over the top. Now in a satin nickel finish, this Add A Frame® continues to wow and complement any decor style. Make it your instant go-to for a sleek, polished look.
With the Val Verde framing your bathroom mirror, you’ll feel like you’re in a portrait every time you see your reflection in the mirror. Traditional scrollwork and a softly beveled interior edge make the Val Verde an elegant option. The vintage style is highlighted by brushed metal accents and the American Pewter finish.
For frames over 90” in length, a $99 handling fee is added due to the oversized nature of the frame. This covers additional labor and shipping fees. Frames over 99” will be spliced.
The framed mirror size you have selected is oversized and will be shipped via LTL Home Delivery.
This order is subject to a $275 handling fee, only one handling fee per order.
All of our frames are custom cut to your specifications. Typically ordering processing takes between 5 and 10 days for your order to be ready to ship. If you'd like your frame to ship within 48 hours, we can expedite the order.
